Toshiba e-STUDIO2020C Service Handbook page 277

Multifunctional digital color systems

Hide thumbs Also See for e-STUDIO2020C:

Table of Contents

When replacing the drum cleaning unit, check that there is no gap between the blade and felt on

both ends. If there is, or when the felts put pressure to the cleaning blade, reattach the felts on

the position shown in the figure (by slightly pushing them to the direction of the arrows).

* G5: Recovery blade

Clean the surface of the recovery blade with a soft pad or cloth, if dirt cannot be removed with a

vacuum cleaner. If the edge of recovery blade is damaged, replace the blade regardless of the

number of output pages.

Never use water or alcohol for cleaning the transfer belt recovery blade.

Drum cleaning blade

e-STUDIO2020C/2330C/2820C/2830C/3520C/3530C/4520C

PREVENTIVE MAINTENANCE (PM)