Table of Contents
Advertisement
(3)
Key in [308] and press the [START] button to move the carriage to the adjustment position.
(4)
Make an adjustment in the order of step 1
and 2.
Step 1
In case of A:
Tighten the mirror-3 adjustment screw (CW).
In case of B:
Loosen the mirror-3 adjustment screw
(CCW).
Step 2
In case of C:
Tighten the mirror-1 adjustment screw (CW).
In case of D:
Loosen the mirror-1 adjustment screw
(CCW).
(5)
Apply the screw locking agents to the adjustment screws. (2 areas)
•
Recommended screw lock agent
Manufacturer: Three Bond
Product name: 1401E
The following adjustments (b) to (e) should be performed with Test Chart No. TCC-1.
P.3-27 " Adjustments and Checks using Test Chart No. TCC-1"
© 2008 - 2011 TOSHIBA TEC CORPORATION All rights reserved
Adjustment screw for the mirror-3 ( Rear )
Fig. 3-15
Adjustment screw
for the mirror-1 ( Rear )
Fig. 3-16
e-STUDIO2020C/2330C/2820C/2830C/3520C/3530C/4520C
3 - 21
3
Carriage-2
Carriage-1
ADJUSTMENT
Advertisement
Table of Contents
