Table of Contents
Advertisement
[G] Right margin
While pressing [0] and [5] simultaneously, turn the power ON. → (Adjustment Mode)
(1)
(2)
Open the platen cover or RADF.
Press [FAX] → [START] to make a copy at the mode of A3/LD, 100%, Full color, Text/Photo and
(3)
2nd drawer.
(4)
Measure the blank area F at the right side of the copied image.
(5)
Check if the blank area F is within the range.
(6)
If not, use the following procedure to change values and repeat the steps 3. to 5. above.
<Procedure>
(Adjustment Mode) → (Key in the code [432]) → [START]
→ (Key in a value (acceptable values: 0 to 255))
→ [ENTER] or [INTERRUPT] (Stored in memory).
→ ("100% A" is displayed.)
* The larger the adjustment value is, the wider the blank area at the right side becomes
(approx. 0.04 mm/step).
© 2008 - 2011 TOSHIBA TEC CORPORATION All rights reserved
Function
Black
Copy
2±2.0 mm
Feeding direction
Fig. 3-18
3 - 25
Color
2±2.0 mm
F
e-STUDIO2020C/2330C/2820C/2830C/3520C/3530C/4520C
3
ADJUSTMENT
Advertisement
Table of Contents
