Table of Contents
Advertisement
(5)
Select "5. MEP Firmware Update" with the digital keys.
"*" is displayed next to the selected item. Display or delete the "*" by pressing the number of the
item.
5. MEP Firmware Update
(6)
Press the [START] button.
Updating starts and the processing status is displayed on the LCD screen.
Status display during update
MEP Firm Update ..........
(7)
"Update Completed." is displayed at the bottom of the LCD screen after the updating is
completed properly.
© 2008 - 2011 TOSHIBA TEC CORPORATION All rights reserved
Item
SROM Update
Fig. 8-12
8 - 19
Remarks
Updating the Imaging Acceleration Board ROM
Status display when update is completed
MEP Firm Update ..........
e-STUDIO2020C/2330C/2820C/2830C/3520C/3530C/4520C
Completed
FIRMWARE UPDATING
8
Advertisement
Table of Contents
