16
ENGINE
16.3.27 Removing the left engine case (125 Duke)
–
Remove screws
.
1
–
Swing the left section of the engine case up and remove the fitting of the engine fixing arm.
–
Pull oil filter
Circlip pliers reverse (51012011000) (
304492-10
–
Mount special tool
Pressure screw for crankshaft (90129020000) (
304791-10
–
Mount special tool
Case separating tool (90129048000) (
Info
Use the drill hole marked with 901.
–
Pull off the section of the engine case by screwing in the screw.
Info
304792-10
Do not wedge the engine case section.
The washer of the main shaft usually sticks to the bearing.
–
Take off the left section of the engine case.
–
Remove the special tool.
out of the oil filter housing.
3
304790-10
.
2
with suitable screws.
3
p. 252)
p. 257)
p. 258)
102