Removing The Force Pump; Removing The Primary Gear; Removing The Free Wheel Gear; Removing The Left Engine Case Section - KTM 450 EXC EU 2013 Repair Manual

18
ENGINE
151
18.3.34 Relloving the force pump
- Remove screws
- Take
off
oil pump cover
- Remove internal rotor and external rotor
- Remove the pin.
- Push oil pump shaft inward and take it out of the engine from the ignition side.
18.3.35 Rellovlng the primary !lear
- Insert special tool in the crankshaft.
I
Protection cover (75029090000) (-- p. 299)
- Install special tool
I
Extractor (75029021000) (-- p. 298)
- Hold it using the special tool and pull off the primary gear
by
turning the screw in.
- Remove the special tools.
18.3.36 Relloving the free wheel !lear
- Remove spri ng washer
- Take
off
free-wheel gear
18.3.37 Rellovlng the left eniline case section
- Remove screws