Removing The Reed Valve Housing; Removing The Left Engine Case Section - KTM Freeride 250 R EU Repair Manual

18 30/ENGINE

18.3.18 Removing the reed valve housing

18.3.19 Removing the left engine case section

–
Mount special tool
the screw.
Extractor (58012009000) (
202759-10
–
Remove screws
–
Take off the intake flange.
202760-10
–
Remove reed valve housing
–
Take off the gasket.
202761-10
–
Remove screws
–
Tilt the left section of the engine case upward and remove the fitting of the engine
fixing arm.
–
Loosen the left section of the engine case by striking it lightly with a plastic ham-
mer and remove it.
Info
Do not pry it apart with screwdrivers since the sealing areas are easily dam-
aged.
202762-10
–
Remove engine case gasket
202763-10
, apply counterpressure, and pull off the rotor by screwing in
3
p. 208)
.
1
.
2
.
1
.
2
116