Installing The Shift Shaft (125 Duke); Installing The Oil Pump (125 Duke) - KTM 125 DUKE EU Repair Manual

16 ENGINE

16.5.11 Installing the shift shaft (125 Duke)

16.5.12 Installing the oil pump (125 Duke)

–
Slide shift shaft
–
Push sliding plate
the way.
–
Let the sliding plate engage in the shift drum locating.
–
Shift through the transmission.
304786-11
–
Position the external rotor in the oil pump housing.
The marking
304816-10
–
Mount the internal rotor with the oil pump shaft.
The marking
304817-10
–
Check that the oil holes are clear and fill with a small amount of oil.
–
Mount the dowels.
–
Position oil pump
–
Mount and tighten screws
Guideline
Screw, oil pump
304785-11
–
Position oil pump gear
–
Mount lock ring
–
Crank the oil pump gear and check for stiffness.
304784-11
with the washer into the bearing seat.
1
away from the shift drum locating
2
is visible after mounting.
A
is visible after mounting.
B
.
1
.
2
M6
.
3
.
4
. Insert the shift shaft all
3
12 Nm Loctite ® 243™
(8.9 lbf ft)
162