15
LIGHTING SYSTEM, INSTRUMENTS
15.9
Changing the headlight bulb
Note
Damage to reflector Reduced brightness.
–
Grease on the lamp will evaporate due to the heat and be deposited on the reflector. Clean the lamp and keep it free of grease
before mounting.
–
Position cover
–
Mount and tighten screws
B00762-10
–
Fold the headlight mask up.
–
Mount and tighten screws
Guideline
Screw, headlight mask
304865-10
–
Mount expanding rivets
–
Check that the lighting is functioning properly.
601915-10
Preparatory work
–
Switch off all power consumers and switch off the engine.
Main work
–
Remove expanding rivets
601915-10
–
Remove screws
–
Lift the headlight mask slightly and swing forward.
601914-10
.
4
.
3
.
2
on both sides.
1
.
1
.
2
M6
11 Nm (8.1 lbf ft)
80