30/DISASSEMBLING ENGINE
Removing the oil pumps
Removing the primary gear with the free-wheel-gear
Removing the left section of the engine case
Remove screws
Take off oil pump covers
200125-10
Remove oil pump shaft
rotor
and external rotor
Remove internal rotor
200126-10
Remove the primary gear and free-wheel-gear using the special tool.
Extractor (78029033100) (
Info
The special tool must engage beneath the toothing for balancer shaft
200135-10
Take off needle bearing
200136-10
Remove all engine case screws M6.
Swing the left section of the engine case upward and remove the nut or screw of
the engine holder.
200137-10
.
of the force pumps.
of the gear oil force pump together with pin
.
and external rotor
of the engine oil force pump.
P. 183)
and collar
of the outer clutch hub.
69
, internal
.