16
ENGINE
16.3.19 Removing the spacer (125 Duke)
16.3.20 Removing the clutch basket (125 Duke)
–
Remove the spacer
304773-10
–
Lock the clutch basket and primary gear using special tool
Gear segment (90129081100) (
–
Remove screws
–
Remove the release bearing holder and clutch springs.
–
Remove the special tool.
Gear segment (90129081100) (
304774-10
–
Mount special tool
Holding spanner (90129012000) (
–
Hold the inner clutch hub with the special tool.
–
Remove nut
Castle nut wrench; ½" drive (90129021000) (
Info
Left-handed thread!
304775-10
–
Remove the special tool.
Holding spanner (90129012000) (
–
Remove the inner clutch hub with the clutch discs.
–
Remove the washer.
Info
The washer usually sticks to the inner clutch hub.
–
Lock the clutch basket and primary gear using special tool
Gear segment (90129081100) (
–
Remove nut
Castle nut wrench; ½" drive (90129021000) (
304776-10
–
Take off clutch basket
304777-10
of the countershaft.
1
p. 259)
.
2
p. 259)
.
3
with washer.
4
p. 259)
with washer.
5
.
6
.
1
p. 256)
p. 257)
p. 256)
.
1
p. 257)
99