Removing The Lower Triple Clamp - KTM 125 DUKE EU Repair Manual

6 FORK, TRIPLE CLAMP
6.7

Removing the lower triple clamp

–
Mount screw cap
Info
Nut
–
Hold the screw cap and tighten the nut.
Guideline
Nut, piston rod on screw cap
202097-10
–
Fill it with fork oil.
Fork oil
Info
If it should be impossible to add the full quantity of oil, close the screw cap
of the outer tube, unclamp the fork and bounce a number of times. Then
add the remaining quantity.
201523-10
–
Push the outer tube upward.
–
Mount screw cap
–
Unclamp the fork leg in the area of the lower triple clamp.
Clamping stand (T612S) (
–
Tighten the screw cap.
Guideline
Screw cap on outer tube
201522-10
Preparatory work
–
Raise the motorcycle with the work stand. (
–
Tie the rear of the vehicle down.
–
Dismount the front fender. (
–
Remove the fork legs. (
Main work
–
Remove expanding rivets
304864-10
–
Remove screws
–
Lift the headlight mask slightly and swing forward.
304865-10
onto the piston rod.
6
must be turned all the way down.
7
450 ml
(15.21 fl. oz.)
.
6
p. 260)
p. 48)
p. 15)
.
1
.
2
M12x1 30 Nm
(22.1 lbf ft)
Fork oil (SAE 4) (48601166S1)
( p. 249)
M47x1.5 30 Nm
(22.1 lbf ft)
p. 11)
22