Vehicle Preparation - APRILIA RSV4 Factory Service Station Manual

RSV4 Factory
pos. Description
1 Pinion protector casing fixing screws
2 Gearbox lever pin fixing screw
3 Gearbox lever fixing screws

Vehicle preparation

Proceed as follows to remove from the chassis:
•
Remove the underfairings, the fairing lug and the radiator cowl.
•
Remove the fuel tank and the battery.
•
Disconnect and remove the hand grip position sensor.
•
Remove the throttle body and the filter box.
•
Remove the complete exhaust.
•
Remove the lubrication and cooling system radiators.
•
Remove the side stand.
•
Remove the left hand rider footpeg.
Position the vehicle as described:
•
Fasten an appropriately sized belt for the weight of the vehicle to the semi-handlebars and
to a hoist.
•
Fit the rear and front stands.
•
Fit the specific under-sump engine support plate.
Specific tooling
020864Y Engine mounting plate
ENGINE
Type Quantity
M6 3
M6 1 10 Nm (7.37 lbf ft)
M6 1 10 Nm (7.37 lbf ft)
Engine from vehicle
Torques Notes
8 Nm (5.9 lbf ft)
ENG VE - 225
-
-
-