Dns Relay Static Setting - D-Link DXS-3326GSR Manual

The following fields can be set:
Parameter
DNS Relay Status
<Disabled>
Primary Name Server
<0.0.0.0>
Secondary Name
Server <0.0.0.0>
DNSR Cache Status
<Disabled>
DNS Static Table
Status <Disabled>

DNS Relay Static Setting

To view the DNS Relay Static Settings, open the DNS Relay folder in the Configuration folder and click the DNS Relay
Static Setting link, which will open the following window.
To add an entry into the DNS Relay Static Table, simply enter a Domain Name with its corresponding IP address and
click Apply. A successful entry will be presented in the table below, as shown in the example above. To erase an entry
from the table, click the
DXS-3326GSR Gigabit Layer 3 Switch
Figure 7- 42. DNS Global Settings window
Description
This field can be toggled between Disabled and Enabled using the pull-down menu,
and is used to enable or disable the DNS Relay service on the Switch.
Allows the entry of the IP address of a primary domain name server (DNS).
Allows the entry of the IP address of a secondary domain name server (DNS).
This can be toggled between Disabled and Enabled. This determines if a DNS cache
will be enabled on the Switch.
This field can be toggled using the pull-down menu between Disabled and Enabled.
This determines if the static DNS table will be used or not.
Figure 7- 43. DNS Relay Static Settings window
corresponding of the entry you wish to delete.
160