User Accounts - D-Link DXS-3326GSR Manual

DXS-3326GSR Gigabit Layer 3 Switch
Use the Security IP Management window to permit remote stations to manage the Switch. If you choose to define one or
more designated management stations, only the chosen stations, as defined by IP address, will be allowed management
privilege through the web manager or Telnet session. To define a management station IP setting, type in the IP address and
click the Apply button.

User Accounts

Use the User Account Management window to control user privileges. To view existing User Accounts, open the
Security Management folder and click on the User Accounts link. This will open the User Account Management
window, as shown below.
Figure 8- 2. User Account Management window
To add a new user, click on the Add button.
Figure 8- 3. User Account Modify Table (New) window
Add a new user by typing in a User Name, and New Password and retype the same password in the Confirm New
Password. Choose the level of privilege (Admin or User) from the Access Right drop-down menu.
To modify an existing user, click on the Modify button for that user on the User Account Management window.
Figure 8- 4. User Account Modify Table (Modify) window
172