D-Link DXS-3326GSR Manual page 228

The following fields can be set or viewed:
Parameter
Unit
Port
Clear
Time Interval
Record Number
64
65-127
128-255
256-511
512-1023
DXS-3326GSR Gigabit Layer 3 Switch
Figure 10- 14. Rx Size Analysis window (table)
Description
Select the unit to display statistics for.
Select the port to display statistics for.
Clicking this button clears all statistics counters on this window.
Select the desired setting between 1s and 60s, where "s" stands for seconds. The
default value is one second.
Select number of times the Switch will be polled between 20 and 200. The default
value is 200.
The total number of packets (including bad packets) received that were 64 octets in
length (excluding framing bits but including FCS octets).
The total number of packets (including bad packets) received that were between 65
and 127 octets in length inclusive (excluding framing bits but including FCS octets).
The total number of packets (including bad packets) received that were between
128 and 255 octets in length inclusive (excluding framing bits but including FCS
octets).
The total number of packets (including bad packets) received that were between
256 and 511 octets in length inclusive (excluding framing bits but including FCS
octets).
The total number of packets (including bad packets) received that were between
512 and 1023 octets in length inclusive (excluding framing bits but including FCS
octets).
215