To delete an Enable Method List defined by the user, click the
desired to be deleted. To modify an Enable Method List, click on its hyperlinked Method List Name. To configure a
Method List, click the Add button.
Both actions will result in the same window to configure:
To define an Enable Login Method List, set the following parameters and click Apply:
Parameter
Method List Name
Method 1, 2, 3, 4
DXS-3326GSR Gigabit Layer 3 Switch
Figure 8- 16. Enable Method List - Edit window
Figure 8- 17. Enable Method List - Add window
Description
Enter a method list name defined by the user of up to 15 characters.
The user may add one, or a combination of up to four of the following authentication
methods to this method list:
local_enable - Adding this parameter will require the user to be
•
authenticated using the local enable password database on the Switch. The
local enable password must be set by the user in the next section entitled
Local Enable Password.
none - Adding this parameter will require no authentication to access the
•
Switch.
radius - Adding this parameter will require the user to be authenticated using
•
the RADIUS protocol from a remote RADIUS server.
tacacs - Adding this parameter will require the user to be authenticated
•
using the TACACS protocol from a remote TACACS server.
under the Delete heading corresponding to the entry
181