Connecting To Network Backbone Or Server - D-Link DXS-3326GSR Manual

DXS-3326GSR Gigabit Layer 3 Switch
Figure 3- 2. Switch connected to a port on a hub or switch using either a straight or crossover cable-
any normal cable is fine
Figure 3- 3. Switch connected to switch using fiber-optic cabling

Connecting To Network Backbone or Server

The 24 SFP ports and the four combo 1000BASE-T ports are ideal for uplinking to a network backbone, server or server
farm. The copper ports operate at a speed of 1000, 100 or 10Mbps in full or half duplex mode. The fiber-optic ports can
operate at 1000Mbps in full duplex mode only.
Connections to the Gigabit Ethernet ports are made using fiber-optic cable or Category 5e copper cable, depending on the
type of port. A valid connection is indicated when the Link LED is lit.
15