IEEE 802.3u compliant
•
IEEE 802.3ab compliant
•
IEEE 802.3ae compliant (for optional XFP module)
•
IEEE 802.1p Priority Queues
•
IEEE 802.3ad Link Aggregation Control Protocol support.
•
IEEE 802.1x Port-based and MAC-based Access Control
•
IEEE 802.1Q VLAN
•
IEEE 802.1D Spanning Tree, IEEE 802.1W Rapid Spanning Tree and IEEE 802.1s Multiple Spanning Tree
•
support
Stacking support in either Ring or Star topology
•
Access Control List (ACL) support
•
IP Multinetting support
•
Protocol VLAN support
•
Single IP Management support
•
Access Authentication Control utilizing TACACS, XTACACS, TACACS+ and RADIUS protocols
•
Dual Image Firmware
•
Simple Network Time Protocol support
•
MAC Notification support
•
System and Port Utilization support
•
System Log Support
•
High performance switching engine performs forwarding and filtering at full wire speed up to 128Gbps.
•
Full- and half-duplex for all gigabit ports. Full duplex allows the switch port to simultaneously transmit and
•
receive data. It only works with connections to full-duplex-capable end stations and switches. Connections to a
hub must take place at half-duplex.
Support broadcast storm filtering
•
Non-blocking store and forward switching scheme capability to support rate adaptation and protocol conversion
•
Supports by-port Egress/Ingress rate control
•
Efficient self-learning and address recognition mechanism enables forwarding rate at wire speed
•
Support port-based enable and disable
•
Address table: Supports up to 8K MAC addresses per device
•
Supports a packet buffer of up to 3 Mbits
•
Supports Port-based VLAN Groups
•
Port Trunking with flexible load distribution and fail-over function
•
IGMP Snooping support
•
Layer 3 support including DVMRP, OSPF and RIP
•
SNMP support
•
Secure Sockets Layer (SSL) and Secure Shell (SSH) support
•
Port Mirroring support
•
MIB support for:
•
RFC1213 MIB II
•
RFC1493 Bridge
•
DXS-3326GSR Gigabit Layer 3 Switch
3