Sntp Setting; Time Setting - D-Link DXS-3326GSR Manual

UDP Port (514 or
6000-65535)
Status
To set the System Log Server configuration, click Apply. To delete an entry from the Current System Log Servers
window, click the corresponding
System Log Servers window, click the

SNTP Setting

Time Setting

To configure the time settings for the Switch, open the Configuration folder, then the SNTP folder and click on the
Current Time Setting link, revealing the following window for the user to configure.
DXS-3326GSR Gigabit Layer 3 Switch
15 clock daemon
16 local use 0 (local0)
17 local use 1 (local1)
18 local use 2 (local2)
19 local use 3 (local3)
20 local use 4 (local4)
21 local use 5 (local5)
22 local use 6 (local6)
23 local use 7 (local7)
Type the UDP port number used for sending Syslog messages. The default is 514.
Choose Enabled or Disabled to activate or deactivate.
under the Delete heading of the entry you wish to delete. To return to the Current
Show All System Log Servers link.
92