Table of Contents
Advertisement
Section 3 - Configuration
Use this setting if your Internet Service Provider has supplied you with a static (non-changing) IPv4 address. If you are missing any of the information
required in this section, please contact your ISP.
Connection
Select Static Setting from the drop-down menu.
Type:
IP Address:
Enter the static IP address provided to you by your ISP.
Mask:
Enter the subnet mask provided to you by your ISP.
Gateway:
Enter the default gateway provided to you by your ISP.
MTU:
Enter the maximum transmission unit for this connection.
The default MTU is 1400.
DNS Setting:
Enter up to three DNS servers as provided to you by your ISP.
Click Apply to apply the changes.
D-Link DWR-830 User Manual
IPv4 - Static Setting
21
Advertisement
Table of Contents
