D-Link DXS-3326GSR Manual page 183

IP Address
Hello Interval (1-18724
sec) <30>
Join/Prune Interval (1-
18724 sec) <60 >
State <Disabled>
Click Apply to implement changes made. Click
Interface Settings window.
DXS-3326GSR Gigabit Layer 3 Switch
Displays the IP address for the IP interface named above.
This field allows an entry of between 1 and 18724 seconds and determines the
interval between sending Hello packets to other routers on the network. The default is
30 seconds.
This field allows an entry of between 1 and 18724 seconds. This interval also
determines the time interval the router uses to automatically remove prune
information from a branch of a multicast delivery tree and begin to flood multicast
messages to all branches of that delivery tree. These two actions are equivalent. The
default is 60 seconds.
This field can be toggled between Enabled and Disabled using the pull-down menu,
and is used to enable or disable PIM-DM for the IP interface. The default is Disabled.
Show All PIM-DM Interface Entries
170
to return to the first PIM-DM