Pim Monitor - D-Link DXS-3326GSR Manual

DXS-3326GSR Gigabit Layer 3 Switch
Browse DVMRP Neighbor Address Table
This table, found in the Monitoring menu under DVMRP Monitor > Browse DVMRP Neighbor Address Table
contains information about DVMRP neighbors of the Switch. To search this table, enter either an Interface Name or
Neighbor Address into the respective field and click the Find button. DVMRP neighbors of that entry will appear in the
DVMRP Neighbor Table window below.
Figure 10- 3 . DVMRP Neighbor Table window 8
Browse DVMRP Routing Next Hop Table
The DVMRP Routing Next Hop Table window contains information regarding the next-hop for forwarding multicast
packets on outgoing interfaces. Each entry in the DVMRP Routing Next Hop Table refers to the next-hop of a specific
source to a specific multicast group address. This table is found in the Monitoring menu under DVMRP Monitoring, with
the heading Browse DVMRP Routing Next Hop Table. To search this table, enter either an Interface Name or Source IP
Address into the respective field and click the Find button. The next hop of that DVMRP Routing entry will appear in the
DVMRP Routing Next Hop Table window below.
Figure 10- 3 . DVMRP Routing Next Hop Table window 9

PIM Monitor

Multicast routers use Protocol Independent Multicast (PIM) to determine which other multicast routers should receive
multicast packets. To find out more information concerning PIM and its configuration on the Switch, see the IP
Multicasting chapter earlier in this manual.
PIM Neighbor Address Table
The PIM Neighbor Table window contains information regarding each of a router's PIM neighbors. This window may be
found in the Monitoring folder under the heading PIM Monitor.
238