Single Ip Management - D-Link DXS-3326GSR Manual

Single IP Management

SIM Settings
Topology
Firmware Upgrade
Configuration Backup/Restore
Simply put, D-Link Single IP Management is a concept that will stack switches together over Ethernet instead of using
stacking ports or modules. There are some advantages in implementing the "Single IP Management" feature:
1. SIM can simplify management of small workgroups or wiring closets while scaling the network to handle
increased bandwidth demand.
2. SIM can reduce the number of IP address needed in your network.
3. SIM can eliminate any specialized cables for stacking connectivity and remove the distance barriers that typically
limit your topology options when using other stacking technology.
Switches using D-Link Single IP Management (labeled here as SIM) must conform to the following rules:
SIM is an optional feature on the Switch and can easily be enabled or disabled through the Command Line
•
Interface or Web Interface. SIM grouping has no effect on the normal operation of the Switch in the user's
network.
There are three classifications for switches using SIM. The Commander Switch (CS), which is the master switch
•
of the group, Member Switch (MS), which is a switch that is recognized by the CS a member of a SIM group,
and a Candidate Switch (CaS), which is a Switch that has a physical link to the SIM group but has not been
recognized by the CS as a member of the SIM group.
A SIM group can only have one Commander Switch (CS).
•
All switches in a particular SIM group must be in the same IP subnet (broadcast domain). Members of a SIM
•
group cannot cross a router.
A SIM group accepts up to 32 switches (numbered 0-31), including the Commander Switch (numbered 0).
•
There is no limit to the number of SIM groups in the same IP subnet (broadcast domain), however a single switch can only
belong to one group.
If multiple VLANs are configured, the SIM group will only utilize the default VLAN on any switch.
SIM allows intermediate devices that do not support SIM. This enables the user to manage switches that are more than one
hop away from the CS.
The SIM group is a group of switches that are managed as a single entity. The DXS-3326GSR may take on three different
roles:
1. Commander Switch (CS) - This is a switch that has been manually configured as the controlling device for a
group, and takes on the following characteristics:
It has an IP Address.
•
It is not a command switch or member switch of another Single IP group.
•
It is connected to the member switches through its management VLAN.
•
2. Member Switch (MS) - This is a switch that has joined a single IP group and is accessible from the CS, and it
takes on the following characteristics:
It is not a CS or MS of another IP group.
•
It is connected to the CS through the CS management VLAN.
•
DXS-3326GSR Gigabit Layer 3 Switch
248
Section 12