4
FUNCTIONS
CHAPTER 4 FUNCTIONS
4.1
Selecting Mode and Function(s)
This section explains how to select the mode and function(s) of the AJ65BT-R2N.
The modes of the AJ65BT-R2N are shown below.
Select a mode that is suitable for the intended use.
(1) Communication with nonprocedural protocol
(2) Connection with the engineering tool
(3) Hardware test
4
- 1
4.1 Selecting Mode and Function(s)
Use the Nonprocedural protocol mode for exchanging data by nonprocedural protocol
through an RS-232 cable connected between the AJ65BT-R2N and external device.
For selection of functions used in Nonprocedural protocol mode, refer to the following.
CC-Link System RS-232 Interface Module User's Manual (Nonprocedural
Protocol Mode)
Use the MELSOFT connection function when accessing a programmable controller
CPU via the AJ65BT-R2N from a personal computer where the engineering tool is
installed.
For the MELSOFT connection function, refer to the following.
Section 4.2 MELSOFT Connection Function
Perform the hardware test when checking whether a single unit of the AJ65BT-R2N
operates normally or not.
For the hardware test, refer to the following.
Section 5.5.1 Hardware test