Displaying Scsi Lun Information - Cisco MDS 9000 Series Configuration Manual

Discovering SCSI Targets
Step 2
switch# discover custom-list delete vsan 1 domain 0X123456
Deletes the specified domain ID from the custom list.

Displaying SCSI LUN Information

Use the show scsi-target and show fcns database commands to display the results of the discovery. See
Examples
page
Displays the Discovered Targets
switch# show scsi-target status
discovery completed
Note
This command takes several minutes to complete, especially if the fabric is large or if several devices
are slow to respond.
Displays the FCNS Database
switch# show fcns database
VSAN 1:
--------------------------------------------------------------------------
FCID
--------------------------------------------------------------------------
0xeb0000
0xeb0201
Total number of entries = 2
VSAN 7:
--------------------------------------------------------------------------
FCID
--------------------------------------------------------------------------
0xed0001
Total number of entries = 1
VSAN 2002:
--------------------------------------------------------------------------
FCID
--------------------------------------------------------------------------
0xcafe00
Total number of entries = 1
Displays the Discovered Target Disks
switch# show scsi-target disk
--------------------------------------------------------------------------------
VSAN
--------------------------------------------------------------------------------
Displays the Discovered Targets, on page 241
243.
TYPE PWWN
N 21:01:00:e0:8b:2a:f6:54 (Qlogic)
NL 10:00:00:00:c9:32:8d:76 (Emulex)
TYPE PWWN
NL 21:00:00:04:cf:fb:42:f8 (Seagate)
TYPE PWWN
N 20:03:00:05:30:00:2a:20 (Cisco)
FCID PWWN
to Displays Automatically Discovered Targets, on
(VENDOR)
(VENDOR)
(VENDOR)
VENDOR MODEL
Cisco MDS 9000 Series Fabric Configuration Guide, Release 8.x
Displaying SCSI LUN Information
FC4-TYPE:FEATURE
scsi-fcp:init
scsi-fcp:init
FC4-TYPE:FEATURE
scsi-fcp:target
FC4-TYPE:FEATURE
FICON:CUP
REV
241