Initial Programming; Country Code - Function 81 - Ricoh FAX7000L Field Service Manual

1-7. Initial Programming

After installation, the following items should be programmed. They can all be programmed by the user. They
can all be programmed in sequence by using Function 81. In this manual, each individual procedure will be ex-
plained.

1-7-1. Country Code - Function 81

Program the international dial access code then the country code.
1.
Make sure that the machine is in standby mode.
2. Press Function, then enter 80, then enter 2222.
3. Enter 81.
4.
Enter the international dial access code then the country code. For example, enter 00144 (Internation-
al code = 001, country code = 44).
To correct a mistake, press Clear (erases the last digit or the cursor digit), or No (erases the entire
code).
Press Yes to store the displayed codes, then press Function to return the machine to standby mode.
5.
1-27