Installing The Machine; Initial Programming - Ricoh FAX2900L Service Manual

21 May, 1999
3. INSTALLATION

3.1 INSTALLING THE MACHINE

Refer to the Operator's Manual for information about the installation environment
and instructions on how to install and set up the machine.
Refer to section 2.4. for how to set up the NCU hardware in each country.

3.2 INITIAL PROGRAMMING

Items to Program (Service Level)
Country code (NCU parameter 00)
Country code (System switch 0F)
Protocol requirements (G3 switch 0B)
Machine's serial number
Service station's fax number
PM call (System switch 01- bit 0)
Periodic service call (RAM address 80036B)
Items to Program (User Administrator Level)
Clock
Initial programming items
On/off switches
Display/report language
Fusing power control during energy saver mode
(User parameter switch 05 - bit 6)
PSTN access code (Also in RAM address 8000BB)
PABX access method
(User parameter switch 13 - bit 0, 1. (Also in RAM
address 8000AD)
INSTALLING THE MACHINE
Function No.
Function 08
Function 01
Function 01
Function 14
Function 13
Function 01
Function 06
Function No.
Function 91
Function 61
Function 62
Function 93
Function 63
Function 61
Function 63
3-1