Pressure Roller; Hot Roller Strippers - Ricoh FAX7000L Field Service Manual

3-8-5. Pressure Roller

1. Remove the hot roller carefully (see sec-
tion 3-8-4). Put the roller in a safe place.
2. Lift out the pressure roller [A], and take
off the E-ring, bushing and washer at
each end.
Reinstalling:
• Do not take the paper off the new roller
until the roller has been installed. The
paper prevents damage to the roller during
installation.
• Do not hit or scratch the surface of the new
roller.

3-8-6. Hot Roller Strippers

It is advisable to replace them all as a set.
There is no need to remove the fusing unit.
For a diagram, see the next page.
1. Remove cover [A] (2 screws).
2. Open the feed-out ass'y.
3. Remove guide plate [B] (2 screws).
4. Remove cover [C] (3 screws).
3-40