30 November, 1999
3. INSTALLATION
3.1 INSTALLING THE MACHINE
Refer to the Operator's Manual for information about the installation environment
and instructions on how to install and set up the machine.
3.2 INITIAL PROGRAMMING
Items to Program (Service Level)
Country code (NCU parameter 00)
Country code (System switch 0F)
Protocol requirements (G3 switch 0B)
PABX access code (RAM address 8000BB)
PABX access method (RAM address 8000AD)
Machine's serial number
Service station's fax number
PM call (System switch 01- bit 0)
Periodic service call (RAM address 800266)
Items to Program (User Administrator Level)
Clock
Initial programming items
On/off switches
Display/report language
Fusing power control during energy saver mode
(User parameter switch 05 - bit 6)
3.3 INSTALLING OPTIONAL UNITS
An optional paper feed unit is available for this machine. Refer to the Operator's
Manual for how to install and set up.
INSTALLING THE MACHINE
Function No.
Function 08
Function 01
Function 01
Function 06
Function 06
Function 14
Function 13
Function 01
Function 06
Function No.
Function 91
Function 61
Function 62
Function 93
Function 63
3-1