Reception Mode - Function 88 - Ricoh FAX7000L Field Service Manual

1-7-11. Reception Mode - Function 88

Select either Automatic Reception (the machine receives fax messages automatically without intervention
by the user) or Manual Reception (the user must be present by the machine when a fax message comes
in).
1. Make sure that the machine is in standby mode.
2. Press Function, then enter 80, then enter 2222.
3. Enter 88, then press Yes.
4. Use the left and right arrows of the scroll key to highlight the required setting.
5. Press Function to store the displayed setting and return the machine to standby mode.
1-7-12. Service Station Number - Service Function 04
1. Make sure that the machine is in standby mode.
2. Enter the service mode as shown on page 2-18, then enter 04.
Type in the service station telephone number. Press Yes to store the number.
3.
4.
Type in the second service station number. Press Yes to store the number.
5. Press Function to return to standby mode.
1-7-13. Serial Number Programming - Service Function 08
1. Make sure that the machine is in standby mode.
2. Enter the service mode as shown on page 2-18, then enter 08.
3. Type in the serial number. Press Yes to store the number.
4. Press Function to return to standby mode.
1-33