Error Code Display - Function 2 - Ricoh FAX7000L Field Service Manual

3-2. Error Code Display - Function 2

See the Hard Disk Error Code table on page 5-71 for an explanation of the error codes.
1. Enter the hard disk troubleshooting mode. See page 5-65.
2. When the hard disk troubleshooting menu is displayed, enter 2 at the ten-key pad.
3. A table of error codes is displayed. Press the up and down arrows of the scroll key to scroll through the
table.
The display contains four columns.
ID: This contains a sequence number from 0001 to 00FF.
MODE: This explains what mode the machine was in when the error occurred
0001 - Hard disk set-up
0002 - Normal system start-up: reading from hard disk
0003 - Formatting the hard disk
0005 - Normal system start-up: writing to hard disk
FF00 - Address label data error
FF10 - Job file (memory file) error
FILE NO: This gives the number of the defective file, as it is shown on the Journal.
SAF ID: This is not for use in the field.
ERROR: This is the error code.
A normally operating machine will show:
ID MODE FILE NO. SAF ID ERROR
0001 0001
4. When you have finished, press Yes to return to the hard disk troubleshooting menu.
FFFF FFFF 0000
5-66