Table of Contents
Advertisement
April 5th, 1996
3. INSTALLATION
3.1. INSTALLING THE MACHINE
Refer to the Operator's Manual for the installation environment and how to in-
stall and set up the machine.
Refer to section 2.4.5 for how to set up the NCU hardware in each country.
3.2. INITIAL PROGRAMMING
Items to Program (Service Level)
Country code (NCU parameter CC)
Country code (System switch 0F)
Protocol requirements (G3 switch 0B)
PABX access code (RAM address 8000BB)
Machine's serial number
Service station's fax number
PM call (System switch 01 - bit 0)
Periodic service call (RAM address 800256)
Items to Program (User Administrator Level)
Clock
Initial programming items (IDs)
On/off switches
Display/report language
PABX access method (User parameter switch 13 - bits 0, 1)
Fusing power control during power saver mode
(User parameter switch 05 - bit 6)
INSTALLING THE MACHINE
3-1
INSTALLATION
Function No.
Function 08
Function 01
Function 01
Function 06
Function 14
Function 13
Function 01
Function 06
Function No.
Function 91
Function 61
Function 62
Function 93
Function 63
Function 63
Advertisement
Table of Contents
