3-4. Printer - Exposure
Switch off the main power before attempting any of the procedures in this section.
3-4-1. Second Cylindrical Lens
1.
Open the upper unit.
2.
Remove plate [B] (1 screw).
3.
Slide out the lens [A].
Cautions: • When installing a new lens,
make sure that the screw on the
lens handle faces down.
• Do not touch the surface of the
new lens.
• If you need to clean the lens,
use an air brush, or a soft dry
cloth.
WARNING
Laser beams can seriously damage the eyes.
3-22