3-10-7. PSU
1.
Remove the transport guide plate (see
section 3-10-5).
2.
Remove the 5 connectors and the earth
wire (see the top figure on the right).
3.
Remove the lower left cover (see section
3-1-1).
4.
Remove the PSU [A] (5 screws, three of
which are under cables on top of the
PSU).
When sliding in the new PSU, take care not
to damage the cables.
3-10-8. Hard Disk
See the next page for a diagram.
Before switching off the power, return the
hard disk head to its shipping position if pos-
sible (see page 1-39).
1. Remove the transport guide plate (see
section 3-10-5).
3-48