Combination Switch - Mercedes-Benz Sprinter Operating Instructions Manual

Exterior lighting
90
Switching on the side lamps
X
Turn the key to position 0 in the ignition lock
Y
( page 129).
X
Remove the key.
X
Turn the light switch to T.
The green T indicator lamp in the instru-
ment cluster lights up.

Combination switch

Turn signal
Right turn signal
:
Left turn signal
;
X
To indicate: press the combination switch in
desired direction : or ; until it engages.
The combination switch automatically returns
to its original position after large steering
movements.
X
To indicate briefly: press the combination
switch briefly in desired direction : or ;.
The corresponding turn signal flashes three
times.
Main-beam headlamps and headlamp
flasher
Main-beam headlamps
:
Headlamp flasher
;
X
To switch on the main-beam headlamps:
switch on the dipped-beam headlamps
Y
( page 88).
X
Press the combination switch forwards :.
The K indicator lamp in the instrument
cluster lights up.
i In the à position, the main-beam head-
lamps are only switched on when it is dark and
the engine is running.
X
To switch off the main-beam headlamps:
move the combination switch back to its nor-
mal position.
The K indicator lamp in the instrument
cluster goes out.
i Vehicles with Highbeam Assist: when High-
beam Assist is active, it controls switching
on/off of the main-beam headlamps
Y
( page 92).
X
To switch on the headlamp flasher: turn
the key to position 1 or 2 in the ignition lock.
X
Pull the combination switch briefly in the
direction of arrow ;.