Operating Safety And Vehicle Approval; Declarations Of Conformity - Mercedes-Benz Sprinter Operating Instructions Manual

Introduction
26

Operating safety and vehicle approval

Information on vehicle operation
There is a risk of damage to the vehicle if:
the vehicle makes contact with the ground,
R
e.g. on a high kerb or a loose road surface
you drive too quickly over an obstacle, e.g. a
R
kerb or a pothole
a heavy object hits the underbody or chassis
R
components
In these or similar situations, the vehicle body/
frame, the underbody, chassis components,
wheels or tyres could be damaged even if this is
not visible from the outside. Components that
have been damaged in this way can unexpect-
edly fail or no longer be able to assimilate the
loads occurring in the event of an accident. If the
underbody panelling is damaged, flammable
material, such as leaves, grass or twigs, could
collect between the underbody and underbody
panelling. These materials could ignite if they
remain in contact with hot components of the
exhaust system for an extended period.
G
WARNING
Flammable material such as leaves, grass or
twigs may ignite if they come into contact with
hot parts of the exhaust system. There is a risk
of fire.
When driving off road or on unpaved roads,
check the vehicle's underside regularly. In
particular, remove parts of plants or other
flammable materials which have become
trapped. In the case of damage, contact a
qualified specialist workshop.
Have the vehicle checked and repaired immedi-
ately at a qualified specialist workshop. If you
become aware when continuing the journey that
driving safety has been effected, stop as soon as
possible in accordance with the traffic condi-
tions. In such cases, consult a qualified special-
ist workshop.

Declarations of conformity

Radio-based vehicle components
The following note applies to all radio-based
components of the vehicle and the information
systems and communication devices integrated
in the vehicle:
The components of the vehicle which receive
and/or transmit radio waves are compliant with
the basic requirements and all other relevant
regulations stipulated by Directive 1999/5/EC.
You can obtain further information from any
Mercedes-Benz Service Centre.
Electromagnetic compatibility
The electromagnetic compatibility of the vehicle
components has been checked and certified
according to the currently valid version of Reg-
ulation ECE-R 10.
Jack
Copy and translation of the original declaration
of conformity:
EC declaration of conformity 2006/42/EC
We, WEBER-HYDRAULIK GMBH, Heilbronner
Str. 30, 74363 Güglingen, hereby declare that
the product "Weber hydraulic jack" types:
A AD ADX AH AHX AL AT ATD ATDX ATG ATN
ATGX ATPX ATQ AX
Load: 2,000 up to 100,000 kg
Serial no.: from construction year 01/2010
comply with the relevant fundamental regula-
tions of the EC machinery directive for safety
and health.
This EC declaration of conformity ceases to be
valid:
if modifications and repairs are not carried
R
out by a qualified person,
if the products are not used correctly and in
R
accordance with the Operating Instructions,
inspections to be conducted regularly have
R
not been implemented.
Relevant EC directives: EC machine directive
2006/42/EC
Applicable standards: ISO 11530
Quality assurance: DIN EN ISO 9001:2000
Güglingen, the 01.07.2013
Signed by
Managing Director, WEBER-HYDRAULIK GmbH
Authorised technical documentation represen-
tative, WEBER-HYDRAULIK GMBH
Heilbronner Straße 30, 74363 Güglingen