On-Board Computer (Vehicles Without Steering Wheel Buttons) - Mercedes-Benz Sprinter Operating Instructions Manual

On-board computer (vehicles without steering wheel buttons)

On-board computer (vehicles without
steering wheel buttons)
Operating the on-board computer
General notes
The on-board computer is activated as soon as
you turn the key to position 1 in the ignition lock.
The on-board computer shows vehicle informa-
tion and settings in the display.
You can control the display and the settings in
the on-board computer using the adjustment
buttons on the instrument cluster.
Standard display
Total distance recorder
:
Trip meter or limit speed set by variable
;
Y
SPEEDTRONIC (
Y
SPEEDTRONIC (
Clock
=
Outside temperature or digital speedometer
?
Y
Fuel gauge ( page 181)
A
Gearshift recommendation on vehicles with
B
manual transmission (
tor lever position or current shift range on
vehicles with automatic transmission
Y
( page 138)
X
To call up the standard display: turn the key
to position 2 in the ignition lock.
X
Press the 4 menu button for longer than
1 second.
The information shown in the display changes
from the outside temperature to the digital
speedometer.
page 157) or permanent
page 159)
Y
page 132) or selec-
Menus in the on-board computer
Overview
If you wish to exit a menu and go to the standard
display:
X
Press the 4 menu button for longer than
1 second.
or
X
Do not press any button for 10 seconds.
The display accepts the changed settings.
Using the f, g, 4 or 9 adjustment buttons,
you can select the following functions:
Calling up the service due date
R
Y
( page 250)
Checking the oil level (
R
Checking the AdBlue
R
Preselecting/setting the auxiliary heating
R
Y
switch-on time ( page 117)
Tyre pressure monitor (
R
Y
Setting the time (
R
Activating/deactivating Highbeam Assist
R
Y
( page 191)
Setting the daytime driving lights
R
Y
( page 88)
Setting the time
X
Turn the key to position 2 in the ignition lock.
X
Press the 4 menu button repeatedly until the
hours figure flashes.
X
Press the f or g button to set the hour.
X
Press the 9 reset button.
The minute display flashes.
X
Press the f or g button to set the minute.
i If you keep the f or g button pressed, the
value will change continuously.
Activating/deactivating Highbeam
Assist
X
Turn the key to position 2 in the ignition lock.
X
Press the 4 menu button repeatedly until the
_ indicator lamp flashes and the
message appears in the display.
X
Use the f or g button to switch Highbeam
Assist on/off.
Y
page 243)
® Y
supply ( page 182)
Y
page 277)
page 183)
on OFF
or
183
Z