Telephone - Mercedes-Benz Sprinter Operating Instructions Manual

Hide thumbs Also See for Sprinter:
Table of Contents

Advertisement

On-board computer (vehicles with steering wheel buttons)
194
Trip computer menu
General notes
You can call up or reset statistical data for the
vehicle in the Trip computer menu.
i
When you call up the trip computer again, it
displays the last function called up.
The units of the statistical information dis-
played are set permanently for each specific
country, and are therefore independent of the
units selected in the
Trip computer "From start" or "From
reset"
Example: "After start" trip computer
Distance
:
Time
;
Average speed
=
Average fuel consumption
?
Use the steering wheel buttons.
X
Press the V or U button to select
After
start.
or
X
Press the 9 or : button to select
After
reset.
The values in the
the start of the journey. The values in the
reset
submenu refer to the last reset of the trip
computer.
After start
The
automatically reset if:
the ignition has been switched off for more
R
than 4 hours.
999 hourshave been exceeded.
R
9,999 kilometreshave been exceeded.
R
After reset
The
reset if the value exceeds 9,999 hours or
99,999 kilometres.
Settings
menu.
After start
submenu refer to
trip computer function is
trip computer is automatically
i
If you turn the key to position 0 in the igni-
tion lock or remove it, all the values are reset
after approximately four hours.
The values will not be reset if you turn the key
back to position 1 or 2 during this time.
Calling up the range
Use the steering wheel buttons.
X
Press the V or U button to select
After
start.
X
Press the 9 or : button to select
Range.
The approximate distance which can be cov-
ered with the tank's current contents and
your current style of driving is shown.
i
If there is only a small amount of fuel left in
the fuel tank, the 7
sage is shown instead of the range.
Resetting the trip computer
Use the steering wheel buttons.
X
Press the V or U button to select
After
start.
X
Press the 9 or : button to select the
function you would like to reset.
X
Press and the 9 hold reset button until the
values are reset to "0".
After
Telephone menu
Introduction
G
WARNING
Operating the integrated information systems
and communications equipment in the vehicle
while driving will distract you from traffic con-
ditions. You could then lose control of the
vehicle. There is a risk of an accident.
Please refuel
mes-

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents