Mercedes-Benz Sprinter Operating Instructions Manual page 295

Removing
X
Loosen wing nuts = manually and then
remove them.
X
Loosen nuts ; as far as the thread end.
X
Slightly raise spare wheel bracket ? and
unhook left-hand retaining hook :.
X
Assemble the pump lever for the jack and
slide it into the sleeve on the right-hand side
of spare wheel bracket ?.
X
Raise spare wheel bracket ? with the pump
lever and unhook right-hand retaining
hook :.
X
Slowly lower spare wheel bracket ? down to
the ground.
X
Lift spare wheel bracket ? slightly and pull
the pump lever out of the sleeve.
X
Use the pump lever to lift the spare wheel
beyond the rear edge of spare wheel
bracket ?.
X
Carefully remove the spare wheel from the
bracket.
The spare wheel is heavy. When the spare
wheel is removed, the centre of gravity
changes due to the heavy weight of the wheel.
The spare wheel may slip down or tip over.
Fitting
X
Carefully place the spare wheel onto spare
wheel bracket ?.
The spare wheel is heavy. When you place the
spare wheel onto spare wheel bracket ?, the
centre of gravity changes due to the weight of
the wheel. The spare wheel may slip down or
tip over.
X
Raise spare wheel bracket ? with the pump
lever and attach right-hand retaining hook :.
X
Slightly raise spare wheel bracket ? and
attach left-hand retaining hook :.
X
Pull the pump lever out.
X
Tighten nuts ;.
X
Put wing nuts = in place and tighten them.
Spare wheel
293
Z