Additional Turn Signals - Mercedes-Benz Sprinter Operating Instructions Manual

Replacing bulbs
98
X
Insert bulb holder : into the lamp and turn it
clockwise to tighten.
X
Close the bonnet.
Additional turn signal lamp (all-wheel-
drive vehicles)
Additional turn signal lamp (example: panel van
and crewbus)
The additional turn signals are mounted on the
side of the vehicle's front wings.
X
Switch off the lighting system.
X
Undo screws : and remove lamp lens ;.
X
Applying light pressure to the bulb, turn it anti-
clockwise and remove it from the bulb holder.
X
Press the new bulb into the bulb holder and
screw it in clockwise.
X
Position lamp lens ; and tighten screws :.
Rear lamps (panel van/crewbus)
Overview of bulb types
Lights
Third brake lamp
:
Brake lamp/tail lamp
;
Turn signal
=
Tail lamps/parking
?
lamps
Rear foglamp, all-wheel-
A
drive vehicles (right-
hand-drive vehicles)
Licence plate illumina-
B
tion
Rear foglamp, all-wheel-
C
drive vehicles (left-hand-
drive vehicles)
Rear foglamp (driver's
D
side)
Reversing lamp
E
Bulb type
LED
P 21W/5W
PY 21W
R5W
P21W
W5W
P21W
P21W
P21W