Mercedes-Benz Sprinter Operating Instructions Manual page 99

Example (halogen headlamps)
Dipped-beam headlamp socket
;
Main-beam headlamps socket
=
Bulb holder for side lamp/parking lamp (hal-
?
ogen headlamps)
X
Turn the corresponding bulb holder with
bulb ;, = or ? anti-clockwise and pull it
out of the lamp.
X
Remove the bulb from the socket.
X
Insert the bulb into the socket in such a way
that its base fits into the recess.
X
Insert the bulb holder with the bulb into the
lamp and turn it clockwise to tighten.
The bulb holder engages audibly.
X
Place housing cover : into the opening and
turn in the opposite direction of the arrow.
X
Close the bonnet.
Cornering light function/daytime driv-
ing lights
X
Switch off the lighting system.
X
Y
Open the bonnet (
X
Turn housing cover : anti-clockwise and
remove.
page 242).
X
Bi-xenon headlamps: turn bulb holder with
bulb ; anti-clockwise and remove it.
Halogen headlamps: press the spring
catches of the bulb holder together and
remove the bulb holder with bulb ;.
X
Remove the bulb from the socket.
X
Press the new bulb into the bulb holder.
X
Bi-xenon headlamps: insert the bulb holder
with bulb ; into the lamp and turn clockwise.
Halogen headlamps: insert the bulb holder
with bulb ; into the lamp.
The bulb holder with bulb ; engages audibly.
X
Replace cap : and turn it clockwise to the
stop.
The cap audibly engages.
X
Y
Close the bonnet (
Turn signal
X
Switch off the lighting system.
X Y
Open the bonnet (
X
Turn bulb holder : anti-clockwise and
remove it.
X
Applying light pressure to the bulb, turn it anti-
clockwise and remove it from bulb holder :.
X
Press the new bulb into bulb holder : and
screw it in clockwise.
Replacing bulbs
page 242).
page 242).
Z
97