Controls
Combination Switch
1 Low beam (turn lighting switch
clockwise tw o notches)
2
High beam (turn lighting switch
clockwise tw o notches)
3
Headlamp flasher (high beam avail
able independent of lighting switch
position)
4 Turn signals, right
5 Turn signals, left
To operate the turn signals, move the
com bination switch past the point of
resistance (up or down). The switch is
autom atically cancelled when the
steering wheel is turned by a large
enough angle.
To signal m inor directional changes of
the vehicle, such as changing lanes
on a highway, move com bination
sw itch to the point of resistance only
and hold it there.
6
Control fo r windshield washer
system
When the washer system is
sw itched on, the w ipers also
operate.
7 W indshield wiper control
0 W indshield w iper sw itched off
1 Interm ittent wiping
II
Normal wiper speed
III High wiper speed
Hints:
If one of the turn signals fails, the turn
signal indicator system flashes and
sounds at a faster sequence than
under normal operating conditions.
Fog lamps will only operate together
with low beam headlamps. Fog lamps
are turned off autom atically when
lighting switch is returned to off-posi
tion.
For the overload protection fo r the
windshield w iper m otor, see page 75.