Combination Switch - Mercedes-Benz G Series Operator's Manual

Instruments
Operation
and controls

Combination switch

Combination switch
1 Low beam
(exterior lamp switch position B)
2
High beam
(exterior lamp switch position B)
Instrument
Driving
cluster display
Practical hints Car care
134
3 High beam flasher (high beam available
independent of exterior lamp switch position)
4 Turn signals, right
5 Turn signals, left
To signal minor directional changes, such as changing
lanes on a highway, move combination switch briefly to
the point of resistance only and release. The turn
signals blink three times.
To operate the turn signals continuously, move the
combination switch past the point of resistance (up or
down). The switch is automatically canceled when the
steering wheel is turned to a large enough degree.
Turn signal failure
If one of the turn signals fails, the turn signal indicator
system flashes and sounds at a faster than normal rate.
Technical
Index
data