Mercedes-Benz Sprinter Operating Instructions Manual page 126

Operating the auxiliary heating system
124
X
Press the b button.
Immediate heating mode is activated. The
time and the y symbol appear.
X
To switch off: press the Û or â button
until the y symbol flashes in the menu bar,
and then press the b button.
Immediate heating mode is deactivated. The
y symbol disappears.
The auxiliary heating operates for another
2 minutes and then switches off automati-
cally.
i If you switch off the ignition during immedi-
ate heating (operating duration 10 –
120 minutes), you also switch off the imme-
diate heating mode. The auxiliary heating
operates for another 2 minutes and then
switches off automatically.
If you have set continuous operation as the
operating duration and you switch off the igni-
tion, the auxiliary heating switches off auto-
matically after about 15 minutes. If, in the
remaining time, the ignition is switched on
again, continuous operation of the auxiliary
heating continues.
Setting the preselection time
You can set three preselection times using the
timer.
After a malfunction or if the battery has been
disconnected, you must set the preselection
times again. You can find information on mal-
functions in the "Problems with the auxiliary
warm-air heater" section (
X
Press the Û or â button until the B
symbol in the menu bar flashes.
X
Press the b button.
In the program column, the G preselection
memory numbers appear. The selected pre-
selection memory flashes.
X
Press the Û or â button to select the
desired preselection memory.
X
Press the b button.
The preselection memory is selected. The
days are shown.
X
Set the day and time as described in the "Set-
ting the day, time and operating duration"
Y
section ( page 123).
The preselection time is stored. The program
column disappears. In the display panel, the
on
message and the y symbol appear.
Y
page 125).
X
Press the b button.
The operating duration flashes.
X
Press the Û or â button to set the
minute value (10 to 120).
X
Press the b button.
The operating duration for the preselection
time is saved. The time and number of the
selected preselection memory are shown.
i The preselection memory that will be acti-
vated next is underlined. Additionally, the day
that is set appears.
Deactivating the preselection time
X
Carry out the steps as described in the "Set-
ting the preselection time" section.
If the y symbol in the status bar is shown:
X
Press the Û or â button until the
message in the display panel is shown.
X
Press the b button.
The preselection time is deactivated. The time
is shown.
Setting the heating level
You can set the heating level to a range between
10 and 30.
The heating level corresponds to a preselection
temperature for the vehicle interior. This is a
guide value and may, depending on the outside
temperature, differ from the interior tempera-
ture.
X
Press the Û or â button until the ß
symbol in the menu bar flashes.
X
Press the b button.
The heating level display flashes.
X
Using the Û and â buttons, set the
desired heating level to a range between 10
and 30.
X
Press the b button.
The heating level is set and the y symbol
appears.
off