Access Step In The Bumper - Mercedes-Benz Sprinter Operating Instructions Manual

Hide thumbs Also See for Sprinter:
Table of Contents

Advertisement

Access step in the bumper

Example: access step in the bumper
Pay attention to the important safety notes in
Y
the "Notes on care" (
pressure cleaning equipment" (
sections.
Keep step in the bumper : free from dirt, such
as:
mud
R
clay
R
snow
R
ice
R
X
Clean step in the bumper : with a high-pres-
sure cleaner.
Cleaning the aluminium dropsides
!
Do not use abrasive cleaning agents to clean
the dropsides. You could otherwise scratch or
damage the surfaces.
X
Brush down the aluminium side panel with
water and a neutral or mild alkaline cleaning
agent.
Cleaning the trailer tow hitch
!
Do not clean the ball coupling with a high-
pressure cleaner. Do not use solvents.
!
Please note the care instructions in the
trailer coupling manufacturer's operating
instructions.
You can also have the maintenance work on the
ball coupling and the trailer tow hitch carried out
by a qualified specialist workshop.
page 256) and "High-
Y
page 258)
Interior
Cleaning the interior
!
Observe the following points when wet
cleaning the vehicle interior:
Never use a high-pressure cleaner.
R
Make sure that no liquids enter or are left in
R
gaps or cavities.
Ensure that there is sufficient ventilation
R
when cleaning.
Make sure that the vehicle interior dries
R
completely after cleaning.
Cleaning the display
!
For cleaning, do not use any of the following:
alcohol-based thinner or petrol
R
abrasive cleaning agents
R
commercially-available household cleaning
R
agents
These may damage the display surface. Do
not put pressure on the display surface when
cleaning. This could lead to irreparable dam-
age to the display.
X
Switch off the audio equipment and let the
display cool down.
X
Clean the display surface with a commercially
available microfibre cloth and cleaner for
TFT/LCD displays.
X
Dry the display surface using a dry microfibre
cloth.
Cleaning the plastic trim
G
WARNING
Care products and cleaning agents containing
solvents can cause surfaces in the cockpit to
become porous. This could result in plastic
parts breaking away when the airbags are
deployed. There is a danger of injury.
Do not use care products and cleaning agents
containing solvents to clean the cockpit.
!
Do not affix the following to plastic surfaces:
stickers
R
films
R
scented oil bottles or similar items
R
You could otherwise damage the plastic.
Care
261
Z

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents