Side Marker Lamp - Mercedes-Benz Sprinter Operating Instructions Manual

X
Applying light pressure to the bulb, turn it anti-
clockwise and remove it from the bulb holder.
X
Press the new bulb into the bulb holder and
screw it in clockwise.
X
Position lamp lens ; and tighten screws :
again.
Outline lamp
Have the LEDs in the perimeter lamp replaced at
a qualified specialist workshop.

Side marker lamp

Type of lamp: LED
The lights are on the side of the vehicle.
X
Switch off the lighting system.
X
Insert a screwdriver or similar implement at
the side and carefully prise off side marker
lamp : in the direction of the arrow.
X
Pull connector ; in the direction of the arrow
from side marker lamp :.
X
Connect new side marker lamp : to con-
nector ;.
X
Attach side marker lamp : on the left and
press it in.
Side marker lamp : engages audibly.
Courtesy lights
Bulb type: W5W
X
Press in the latching spring of courtesy
light : with a suitable implement, e.g. a
screwdriver.
X
Prise off courtesy light :.
X
Disconnect cable connector =.
X
Unscrew bulb holder ;.
X
Remove the bulb from bulb holder ;.
X
Press the new bulb into bulb holder ;.
X
Screw bulb holder ; into courtesy light :.
X
Connect cable connector =.
The connector locking spring must engage.
X
Align courtesy light : on the side and
engage.
Interior lighting
General notes
! Have the bulbs in the overhead control
panel replaced at a qualified specialist work-
shop. You could otherwise damage the over-
head control panel.
Replacing bulbs
Z
101