Samsung OfficeServ 7200 Programming Manual page 85

CHAPTER 2. MMC Programming
No Option
14 ICM EXT FWD
16 DID ERR TONE
18 KTS DISC ALM
19 OFF HOOK ALM
20 SL SELF RING
21 SGR INC BUSY
24 TRANSFER
CANCEL
26 RECALL DISC
29 ARD TONE CHK
30 VPN ENABLE
31 IN TOLL CHK
32 ISDN
PROGCON
33 INCLUDE VAT
36 DSS KEY DPU
37 BEGN DGT DSP
38 ONE TCH
FACC
Samsung Business Communications
Default
OFF When ON, call forward external is allowed when intercom calls
are placed to a station that has Call Forward External pro-
grammed and set.
OFF This option provides error tone when an invalid DID number
is received.
OFF When ON, generates a system alarm when a phone discon-
nects or connects.
OFF When ON, generates a system alarm when a phone stays
off-hook longer than this timer.
OFF When ON, generates ring of 10 seconds when a single line
phone dials itself and hangs up (self test).
OFF When ON, generates busy tone when all station group
members are busy for a group call. This does not work for
station groups which have Unconditional Ring mode set.
OFF When OFF, a single line phone can handle 2 calls simulta-
neously using the hook-flash to toggle between them. When
ON, a single line phone can connect to the second call, but
pressing the hook-flash will not toggle between the two calls
it will disconnect the second call and reconnect the single
line phone to the first call.
OFF When ON, the system disconnects a transferred call when it
recalls.
ON When system detects CO BUSY TONE from Central Office,
it returns to auto redial state.
OFF When ON, VPN is enabled. (Australia only.)
OFF When OFF, the system doesn't toll restrict incoming calls.
OFF When ON, if an outgoing call receives PROGRESS mes-
sage from ISDN trunk, the call will connect without CON-
NECT message.
OFF When ON, an "Inclusive VAT of" line is printed on Hotel in-
voices (Hotel Application).
OFF When ON, pressing a DS key will pick up the call at a ringing
station
OFF When ON, and an outside call is made via speed dial or LNR
where more than 11 digits are dialled, then only the first 11
dialled digits are shown on the phone display.
OFF When OFF, phone users cannot use one-touch account
code (ACC) key.
OfficServ 7200 Programming Guide
Description
2-54