Samsung OfficeServ 7200 Programming Manual page 358

CHAPTER 2. MMC Programming
No Option
10 FRAME
COUNT
11 JITTER BUF
12 TOS FIELD
13 S/W VERSION
14 S/W UPGRADE
15 TIME ZONE
16 PUBLIC TO
PUBLIC
17 SIG TYPE
18 PRIVATE IP
DEFAULT DATA
SEE DESCRIPTION
Samsung Business Communications
Description
This value determines the transmission interval time of
VoIP packets generated by the IP phone. This data
uses MMC 841 ITP DSP PARA DOWN = PHONE DATA
only. The range is 10~40 ms.
Decides the minimum time to consider delay for jitter
adjustment. This data uses MMC 841 ITP DSP PARA
DOWN = PHONE DATA only. The range is 10~90 ms.
An 8-bit binary value that will be used by external
routers, switches, etc, (that optionally support TOS-bit
prioritization) to identify the transport-priority value of
data packets generated by the IP phone. This value can
be left at the default value (00000) if your network infra-
structure does not support this method of bandwidth
management. This data uses MMC 841 ITP DSP PARA
DOWN = PHONE DATA only.
Display IP phone software version. (Read only.)
This is used as IP phone software upgrade request
command. When YES is selected and Right Soft button
is pressed, the system requests IP phone software up-
grade with TFTP IP address.
Allows remote IP phones to display own time zone.
When this option is set to USE MGI, the MGI can be
allocated between remote IPs in the same private zone.
This option can change UDP/TCP signal type for IPs.
(ITP V3.xx only supports the TCP signal type. If TCP is
set and ITP V2.xx attempts to connect, the TCP signal
type will change from TCP to UDP automatically.)
Displays private IP address of remote IP phone allo-
cated by phone's router.
OfficServ 7200 Programming Guide
Default
20 ms
20 m
All bits 0
-
-
00.00
NOT USE MGI
UDP
-
2-327