Samsung OfficeServ 7200 Programming Manual page 51

CHAPTER 2. MMC Programming
[110] STATION ON/OFF
Allows the system administrator to set any of the phone features listed below.
No Feature
00 AUTO HOLD
01 AUTO TIMER
02 HEADSET USE
03 HOT KEYPAD
04 KEY TONE
05 PAGE REJOIN
06 RING PREF.
07 CALL COST
08 AUTO CAMPON
09 AME BGM
10 AME PASSCODE
11 DISP SPDNAME
12 CID REVW ALL
13 SECURE OHVA
Samsung Business Communications
Default
OFF Automatically places an existing Trunk Line call on hold if
a CALL key, trunk key or trunk route key is pressed dur-
ing that call.
ON Automatically starts the stopwatch timer during a Trunk
Line call.
OFF When ON, this feature disables the hook switch allowing
a headset user to answer all calls by pressing the
ANS/RLS button or SEND and END buttons.
ON When ON, this feature allows you to dial directory num-
bers without having to first lift the handset or press the
Speaker button.
ON Allows you to hear a slight tone when pressing buttons
on phone.
ON Allows you to hear the remaining part of page an-
nouncements if phone becomes free during a page.
ON When OFF, requires you to press the fast flashing button
to answer a ringing call after lifting the handset.
OFF When ON, the cost of the call in progress will show in the
upper right corner of the phone display instead of dura-
tion of the call.
OFF When ON, phone users can allow intercom calls to
camp-on to other phones without having to press a
CAMP-ON key.
OFF This feature selects whether a station using Answer Ma-
chine Emulation will hear their personal greeting or BGM
while callers are listening to the personal greeting.
A BGM source must be selected for this to work.
OFF When ON, station users who have AME set must enter
their station password to listen to messages being left.
OFF When ON, the speed dial name associated with a speed
dial number is displayed on a phone equipped a LCD
display when using speed dial.
ON When ON, saves information on all calls that ring at an
extension, When OFF, saves information only on calls
that were not answered at the extension or were an-
swered by voice mail.
ON When ON, OHVA announcements will be heard on the
handset. When OFF, OHVA announcements will be
heard over the phone speaker.
OfficServ 7200 Programming Guide
Description
2-20